Zanussi ZHC 604, Руководство по установке, использованию и техническому обслуживанию

Страница: 8 / 11

20
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
GB
• Recirculation fitting
In this type of installation the incoming air is filtered
and recycled inside the living-area.
• Open the venting grille by pressing the knobs towards
the inside ( Fig. 11 )
• Check that the lever (single-motor hood) or the dial
(two-motor hood) is in the exhaust position ( Fig.12 ).
• Mount the activated charcoal filter (see chapter on
Maintenance ).
Fitting the telescopic chimney
• To fit the U-shaped upper section item S, widen the
two lateral sides slightly, hook them behind the wall
brackets item
2 and ensure that they are correctly
fastened. Secure the upper section to the wall brackets
item
2 using 4 screws supplied ( fig. 14 ).
• The lower section item I of the chimney stack can be
fixed in a similar way between the wall bracket item 2
and the wall paying attention to fit the lower part of the
chimney to the air outlet flange using two screws
supplied.
Fig. 14
Fig. 13