Zanussi ZGO75524BA, Руководство пользователя

Страница: 13 / 16

Green and yellow - Earth
Blue - Neutral
Brown - Live
WARNING!
A cut off plug inserted into a 13 amp
socket is a serious shock hazard.
Ensure that the cut off plug is
disposed of safely.
Replacement of the connection cable
The replacement of electric cable
must be carried out exclusively by
the service force centre or by
personnel with similar
competencies, in accordance with
the current regulations.
To replace the connection cable use
only H05V2V2-F T90 or equivalent
type. Make sure that the cable
section is applicable to the voltage
load and the working temperature.
The yellow/green earth wire (B)
must be approximately 2 cm longer
than the live and neutral wire (A).
A B
1. Connect the green and yellow (earth) wire
to the terminal which is marked with the
letter 'E', or the earth symbol , or
coloured green and yellow.
2. Connect the blue (neutral) wire to the
terminal which is marked with the letter 'N'
or coloured blue.
3. Connect the brown (live) wire to the
terminal which is marked with the letter 'L'. It
must always be connected to the network
phase. There must be no cut or stray
strands of wire present. The cord clamp
must be correctly attached to the outer
sheath.
Building In
min. 55 mm
min. 650 mm
560 mm
min. 200 mm
30 mm
480 mm
min. 600 mm
A
B
A) supplied seal
B) supplied brackets
CAUTION!
Install the appliance only on a
worktop with flat surface.
Possibilities for insertion
Kitchen unit with door
The panel installed below the hob must be easy
to remove and let an easy access in case a
technical assistance intervention is necessary.
www.zanussi.com 13