background image

WARNING! Risk of fire and explosion

• Fats and oil when heated can release flammable

vapours. Keep flames or heated objects away

from fats and oils when you cook with them.

• The vapours that very hot oil releases can cause

spontaneous combustion.

• Used oil, that can contain food remnants, can

cause fire at a lower temperature than oil used

for the first time.

• Do not put flammable products or items that are

wet with flammable products in, near or on the

appliance.

WARNING! Risk of damage to the

appliance.

• Do not keep hot cookware on the control panel.

• Do not let cookware boil dry.

• Be careful not to let objects or cookware fall on

the appliance. The surface can be damaged.

• Never leave a burner on with empty cookware or

without cookware.

• Do not put aluminium foil on the appliance.

• Use only stable cookware with the correct

shape and diameter larger than the dimensions

of the burners.

• Make sure cookware is centrally positioned on

the burners.

• Do not use large cookware that overlap the

edges of the appliance. This can cause damage

to the worktop surface.

• Make sure the flame does not go out when you

quickly turn the knob from the maximum to the

minimum position.

• Use only the accessories supplied with the

appliance.

• Do not install a flame diffuser on the burner.

• The use of a gas cooking appliance results in

the production of heat and moisture. Provide

good ventilation in the room where the

appliance is installed.

• Prolonged intensive use of the appliance may

call for additional ventilation, for example

opening of a window, or more effective

ventilation, for example increasing the level of

mechanical ventilation where present.

• This appliance is for cooking purposes only. It

must not be used for other purposes, for

example room heating.

• Do not let acid liquids, for example vinegar,

lemon juice or limescale remover, touch the hob.

This can cause matt patches.

• Discoloration of the enamel or stainless steel

has no effect on the performance of the

appliance.

CARE AND CLEANING

WARNING! Do not remove the

buttons, knobs or gaskets from the

control panel. Water may get inside

the appliance and cause damage.

• Clean the appliance regularly to prevent the

deterioration of the surface material.

• Deactivate the appliance and let it cool down

before you clean it.

• Disconnect the appliance from the electrical

supply before maintenance.

• Do not use water spray and steam to clean the

appliance.

• Clean the appliance with a moist soft cloth. Use

only neutral detergents. Do not use abrasive

products, abrasive cleaning pads, solvents or

metal objects.

• Do not clean the burners in the dishwasher.

SERVICE
• To repair the appliance contact the Authorised

Service Centre.

• Use original spare parts only.

DISPOSAL

WARNING! Risk of injury or

suffocation.

• Contact your municipal authority for information

on how to discard the appliance correctly.

• Disconnect the appliance from the mains

supply.

• Cut off the mains electrical cable close to the

appliance and dispose of it.

• Flat the external gas pipes.

INSTALLATION

WARNING! Refer to Safety chapters.

BEFORE THE INSTALLATION
Before you install the hob, write down the

information below from the rating plate. The rating

plate is on the bottom of the hob.

5

Содержание ZGH65414XA

















Отзывы: