Zanussi ZGF 7521, Инструкция пользователя

Страница: 17 / 32

17
A)
End of shaft with nut
B)
Washer
C)
Elbow
FO 0264
It is important to install the elbow corr It is important to install the elbow corr
It is important to install the elbow corr It is important to install the elbow corr
It is important to install the elbow correctly ectly
ectly ectly
ectly, with the shoulder on , with the shoulder on
, with the shoulder on , with the shoulder on
, with the shoulder on
the end of the thread, fitted to the hob connecting pipe. the end of the thread, fitted to the hob connecting pipe.
the end of the thread, fitted to the hob connecting pipe. the end of the thread, fitted to the hob connecting pipe.
the end of the thread, fitted to the hob connecting pipe.
Failure to ensure the correct assembly will cause leakage of gas. Failure to ensure the correct assembly will cause leakage of gas.
Failure to ensure the correct assembly will cause leakage of gas. Failure to ensure the correct assembly will cause leakage of gas.
Failure to ensure the correct assembly will cause leakage of gas.
Gas Connection Gas Connection
Gas Connection Gas Connection Gas Connection
Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or
copper.
The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).
When the final connection has been made, it is essential that a thorough leak test is
carried out on the hob and installation.
Ensure that the main connection pipe does not exert any strain on the hob.
On the end of the shaft, which includes the G 1/2" threaded elbow, adjustment
is fixed so that the washer is fitted between the components as shown in the
diagram. Screw the parts together without using excessive force.