background image

5

Red Alarm Indicator Light

SWITCHING ON
Leave the appliance to stand upright for 4 hours

after installation.
1. Insert the plug into the wall socket.

2. Turn the Temperature Regulator clockwise to a

medium position.

The Green On/Off Indicator Light will light up

and Red Alarm Indicator Light will blink.

The lighting up of the Green On/Off Indicator

Light means that the appliance is switched on.

The blinking of the Red Alarm Indicator

Light and the acoustic alarm means an

improper temperature in the freezing

compartment. Press the Acoustic

Signal Stop and QuickFreeze Switch

to deactivate the acoustic alarm. The

alarm indicator continues to flash until

the normal conditions are restored.

When switching on the freezer for the

first time, the Red Alarm Indicator

Light will blink until the internal

temperature has reached a level

required for the safe conservation of

frozen food.

SWITCHING OFF
1. 
To turn off the appliance, turn the Temperature

Regulator to the O position.

The Green On/Of Indicator Light will switch off.

2. To disconnect the appliance from the power,

disconnect the mains plug from the wall socket.

HIGH TEMPERATURE ALARM
Under normal operating conditions, the internal

temperature of the freezer will ensure the long-term

conservation of the stored food.
The temperature increase above a certain level in

the freezer (-12 °C, for example due to an earlier

power failure) is indicated by flashing the Red

Alarm Indicator Light and sounding the acoustic

alarm.
To deactivate the alarm press the Acoustic Signal

Stop.

The Red Alarm Indicator Light

continues to flash until the internal

temperature has reached a level

required for the safe conservation of

frozen food.

TEMPERATURE REGULATION

CAUTION! Do not place heavy nor

hot objects on top of the appliance to

avoid any damage.

The temperature within the appliance is controlled

by the Temperature Regulator situated on the

control panel.
To operate the appliance, proceed as follows:

• turn the Temperature Regulator toward lower

settings to obtain the minimum coldness.

• turn the Temperature Regulator toward higher

settings to obtain the maximum coldness.

A medium setting is generally the most

suitable.

However, the exact setting should be chosen

keeping in mind that the temperature inside the

appliance depends on:

• room temperature

• how often the door is opened

• the quantity of food stored

• the location of the appliance.

QUICKFREEZE FUNCTION
If more than 3-4 kg of food is to be frozen:
1. Press the QuickFreeze button for 2-3 seconds

to activate the QuickFreeze function 6-24

hours before placing the fresh food in the

freezer, the Yellow QuickFreeze Indicator Light

will illuminate. The compressor will now run

continuously, to ensure that the fresh food is

frozen as quickly as possible.

It is possible to deactivate the

function at any time by pressing

the QuickFreeze button for 2-3

seconds.

2. Place the food in the freezing compartment or

compartments and leave the QuickFreeze

function for a further 24 hours.

3. Once the food is completely frozen, press the

QuickFreeze button for 2- 3 seconds and the

Yellow QuickFreeze Indicator Light will go out.

4. Move frozen food from the freezing

compartments into the storing compartments to

make room for another freezing.

5

Содержание ZFT11112WV

















Отзывы: