Zanussi ZFT10210WV, Руководство пользователя

Страница: 9 / 16

Problem Possible cause Solution
Food products placed in the
appliance were too warm.
Allow food products to cool to
room temperature before stor-
ing.
The door is not closed correct-
ly.
Refer to "Closing the door".
The QuickFreeze function is
switched on.
Refer to "QuickFreeze func-
tion".
There is too much frost and
ice.
The door is not closed correct-
ly or the gasket is deformed/
dirty.
Refer to "Closing the door".
Food products are not wrap-
ped properly.
Wrap the food products better.
The compressor does not start
immediately after pressing the
QuickFreeze, or after changing
the temperature.
This is normal, no error has oc-
curred.
The compressor starts after a
period of time.
Water flows on the floor. The melting water outlet is not
connected to the evaporative
tray above the compressor.
Attach the melting water outlet
to the evaporative tray.
Temperature cannot be set. The QuickFreeze function is
switched on.
Switch off QuickFreeze man-
ually, or wait until the function
resets automatically to set the
temperature. Refer to "Quick-
Freeze function"
Door is misaligned or interferes
with ventilation grill.
The appliance is not levelled. Refer to "Levelling".
The temperature in the appli-
ance is too low/too high.
The temperature regulator is
not set correctly.
Set a higher/lower tempera-
ture.
The door is not closed correct-
ly.
Refer to "Closing the door".
The food products' tempera-
ture is too high.
Let the food products temper-
ature decrease to room tem-
perature before storage.
Many food products are stored
at the same time.
Store less food products at the
same time.
The door has been opened of-
ten.
Open the door only if necessa-
ry.
The QuickFreeze function is
switched on.
Refer to "QuickFreeze func-
tion".
There is no cold air circulation
in the appliance.
Make sure that there is cold air
circulation in the appliance.
9