Zanussi ZFT 710FW, Инструкция

Страница: 7 / 16

7
Switches and indicators
A) On/off indicator green
B) Thermostat and on/off switch
C) Quick freeze indicator yellow
D) Acoustic signal stop and quick freeze switch
E) Alarm indicator red
Basket Storage
Frozen food should be stored in the two lower baskets
and the top compartment used for storage or fast freez-
ing of fresh food.
Operation and use
Installation
Insert the plug into the socket. In order to switch on the
product, turn the thermostat
(B) to a temperature lower
than << -16 °C >>. The green indicator will light up and the
red indicator will blink. The lighting up of the on/off indi-
cator
(A) means that the product is switched on. The
blinking of the red indicator means an improper tempera-
ture in the freezing compartment. In addition, an intermit-
tent sound can be heard, which can be stopped by press-
ing button
(D) once. You can switch off the freezer by
turning the thermostat (B) in position << >>.
Adjusting the temperature
The internal temperature of the freezer is regulated elec-
tronically through five temperature positions and a switch-
off <<
>> setting.
Position << -16 °C>> indicates the highest (least cold)
temperature, while position << -24 °C>> is for the lowest
(coldest) temperature. Rotate the thermostat in the
desired position.
In general, it is best to set the thermostat to << -18°C >>
but, for the purpose of temperature setting, you should
also consider
the temperature of the room where the product is
installed,
the frequency of door openings,
the volume of food to be stored in the product,
the location of the product.
Therefore, you should consider all factors and you may
have to do some testing to find the best temperature. If
you want a lower temperature, turn the thermostat into a
position of higher number or, vice versa, if you need a
higher temperature, you should set a position of lower
number. Please allow 24 hours for the freezer tempera-
ture to stabilize between two adjustments.
Alarm (red) indicator
The temperature alarm indicator (E) will light up when the
internal temperature of the freezer increases to a level
(above -12°C) where the long-term conservation of the
foods in not ensured. Please note that, when switching on
the freezer for the first time, the alarm indicator will blink
until the internal temperature has reached a level required
for the safe conservation of frozen food.
Temperature problem:
Under normal operating conditions, the internal tempera-
ture of the freezer will ensure the long-term conservation
of the stored food. When such temperature rises above a
certain level (-12°C), it will trigger an acoustic and light
alarm. The light alarm is a blink red light
(E) , while the
acoustic alarm is an intermittent sound. You can stop the
acoustic alarm by pressing switch
(D) once.
Freezing
Prepare the various foods properly and then freeze them
always in the freezing compartment.
For using the quick freeze function, press the quick freeze
on/off switch
(D) for 2-3 seconds; in the case of small
and great food volumes you should do it approx. 4 and 24
hours, respectively, before you want to freeze the fresh
food. The yellow indicator
(C) will light up. The compres-
sor will operate continuously until the product reaches the
freezing temperature.
Once the food is completely frozen (it may take up to 24
hours) you can manually switch off the quick freeze func-
tion by pressing the switch
(D) for 2-3 seconds. If not
switched off manually, the quick freeze function will be
automatically switched off 48 hours later. The yellow indi-
cator
(C) will also go out.