18
Inner door reversal
Using a screwdriver release bracket (1) by pressing
on the internal spring (Fig. 6) and withdraw it from its
seat together with the door;
remove plug (2) and fit it in the hole left open on the
opposite side;
turn the door through 180
°
, remove the bracket (1)
and refit it on the opposite side.
Refit the door and insert the top pin and bottom
bracket (1), pushing it into place.
To ensure correct storage of food, the door is fitted
with a simple spring device which holds it in the open
position until it is properly closed.
Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply.
Voltage can vary by
±
6% of the rated voltage.
For operation with different voltages, a suitably sized
auto-transformer must be used.
Fig. 6
PR140
1
2
180°
TECHNICAL SPECIFICATION
GB
The technical data is indicated in the rating plate on the left side inside the appliance.
