Zanussi ZFC 66/14 Скачать руководство пользователя страница 16

16

WHAT HAPPENS IF SOMETHING GOES WRONG?

Before contacting your local Zanussi Service 
Centre, check the following points:

The appliance does not work...

Check that:

ª

There is power at the socket.

ª

Ensure that there is not a power cut by checking 
the household lights.

ª

The fuse has not blown.

ª

The air circulation passages are not covered.

ª

The thermostat dial is in the correct position.

Vibration or abnormal noises...

ª

You may hear faint gurgling or bubbling sounds 
when the refrigerant is pumped through the coils 
of tubing at the rear, to the cooling plate/
evaporator. When the compressor is on, the 
refrigerant is being pumped round, and you will 
hear a whirring or pulsating noise from the 
compressor.
A thermostat controls the compressor, and you 
will hear a faint “click” when the thermostat cuts 
in and out.

Traces of water on the bottom of the fridge 
compartment...

Check that:

ª

The defrosting water discharge hole is not 
obstructed.

The light does not come on...

Check that:

ª

The bulb is fitted correctly.

ª

Replace the bulb if it has blown.

Fridge does not defrost...

Check that:

ª

The thermostat setting is not too high (see 
page 9).

Other points to check...

Check that:

ª

Have you turned the thermostat to the correct 
setting?

ª

Have doors been left open causing the 
temperature to rise?

ª

Sometimes the freezer door will be difficult to 
open shortly after you have closed it. Don’t worry 
this is due to pressure difference which will 
quickly equalise and allow the door to open 
normally.

If, after the above checks, there is still a fault, call 
your local Zanussi Service Centre, whose address 
can be found in the accompanying Customer Care 
Booklet, and can also be found in your local 
telephone directory under «Z». Please make sure 
you give the model and serial number of the 
appliance. This information can be found on the 
rating plate inside the fridge compartment on the 
left side behind the vegetable drawer, or on the 
guarantee certificate.

Original spare parts can be purchased from Zanussi 
Service Centres.

In-guarantee customers should ensure that the above 
checks have been made as the engineer will make a 
charge if the fault is not a mechanical or electrical 
breakdown.

Please note that proof of purchase is required for any in-
guarantee service calls.

SERVICE DETAILS - ADHESIVE LABEL

When you return your guarantee card to Zanussi 
Ltd., you will receive an Appliance Guarantee and 
Maintenance Record Card together with an 
adhesive label. The label can be stuck to the 
machine or adjacent furniture.

Содержание ZFC 66/14





















Отзывы: