38
Aligning the worktop of the appliance with the
kitchen furniture
The appliance worktop is aligned with the door.
It can however be easily aligned to the kitchen
furniture by proceeding as follows:
unscrew the screws on the upper hinges that fasten
the worktop to the appliance.
Move the worktop to the desired position and
tighten the screws again.
Installation under the kitchen’s work-top
Open the door.
Remove from the upper hinges the screws (F-
Fig. 6) that fix the appliance’s work-top.
Push the work-top (G) toward the back of the
appliance and remove it.
Remove the work-top’s brackets (H) from the
appliance.
Unscrew the feet and fit them in the openings
situated immediately behind (see Figure 7).
Fix the appliance to the kitchen’s work-top, using
the openings on the upper hinges.
Fig. 6
Fig. 7
D155
G
H
F
D156
Important
For the appliance to function properly, an opening
of at least 137 cm
2
(Fig. 8) must be cut in the
kitchen worktop.
A minimum clearance must also be provided
between the condenser and the wall, as shown in
the Fig. 9.
Fig. 8
Fig. 9
D219
min 137cm
2
PR122
60 mm
min.
50 cm
2
