Zanussi ZESB7001 Скачать руководство пользователя страница 4

SAFETY INSTRUCTIONS

Make sure that the heating area (wire element) on any side of the bed does not 
hang over the edge of the mattress and that the following instructions are read 
carefully before using the blanket.

Do not use this blanket for infants, persons with no/limited mobility or heat 
sensitivity conditions.

Do not use with wired area tucked in. 

Do not tuck in.

Do not insert pins.

Use only for human use, not for pets

Warning: It is hazardous for anyone other than a competent person to carry out 
any service or repair operation which involves the removal of a cover which gives 
protection against exposure to electrical parts.

Warning: Children should not use this appliance. Close supervision is necessary 
when any appliances are used near children.

Warning: This appliance is not intended for use by persons (including children) 
with reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction concerning use 
of the appliance by a person responsible for their safety. Children should be 
supervised to make sure that they do not play with the appliance.

It is recommended that a qualified and registered person inspect your electric 
blanket after each 3 years of use.

This blanket must be kept in the fully spread condition at all times during use to 
avoid overheating. It is imperative that the blanket is frequently inspected to 
ensure that this condition is being maintained.

Bed clothes should not be folded back when the blanket is switched on. Do not 
leave heavy objects on the bed when the unit is switched on.

Arrange the blanket so that it is not beneath pillows and / or bolsters.

Long periods of use at the high setting can result in skin irritation or burns.

Keep control unit away from an open window.

Be sure that this blanket is used only on an alternating current supply circuit of the 
correct voltage.

The flexible power supply and switch must, as for as practicable, be kept outside 
the bed.

Switch off at the power outlet and remove the plug when this blanket is not in 
actual use.

Do not use if moist or wet.

Do not use rucked or folded.

4

Содержание ZESB7001





















Отзывы: