USING YOUR ELECTRIC INSET FIRE
10
Remote Operation
To activate the appliance by simply pressing the standby rocker switch which is
located at the front left-hand side of the product. The appliance will beep to
indicate that it is powered up.
It takes a couple of seconds for the receiver to respond to the transmitter. Do
not press the buttons more than once within two seconds for the fire to operate
normally.
•
Connect the power
•
Turn on the power switch
•
Press the "ON/OFF" key of the remote controller to start up
•
Press the 1000W button for the 1000W heat settings, and press twice to
switch off the heat setting.
•
Press the 2000W button for the 2000W heat settings; and press twice to
switch off the heat setting.
•
Press the DIMMER button for diming the flame effect.
