Zanussi ZDT26050FA, Руководство пользователя

Страница: 10 / 40

ADDING DETERGENT
30
2
1
30
If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance
door.
ADDING MULTI-TABLETS
30
2
1
30
• Do not fill the salt container and the rinse aid dispenser.
• Adjust the water softener to the lowest level.
• Set the rinse aid dispenser to the lowest position.
SETTING AND STARTING A PROGRAMME
The AUTO OFF function
This function decreases energy consumption by
deactivating automatically the appliance when it is
not operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has not
started.
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
appliance. Make sure that the appliance is in
programme selection mode.
3. Press one of the programme buttons until the
display shows the number of the desired
programme. The display shows the programme
duration after some seconds.
4. Set the applicable options.
5. Close the appliance door to start the
programme.
Options
Desired options must be activated
every time before you start a
programme.
It is not possible to activate or
deactivate options while a programme
is running.
Not all options are compatible with
each other. If you select non
compatible options, the appliance
automatically deactivates one or more
of them. Only the indicators of the still
active options are on.
Option Delay
1. Set a programme.
2. Press
until the display shows the delay time
you want to set (1-24h).
The delay time flashes in the display.
3. Close the appliance door. The countdown
starts to decrease by 1 hour.
When the countdown is complete the programme
starts.
10