background image

Programme

Degree of soil

Type of load

Programme phases

Consumption values

1)

Duration

(min)

Energy

(kWh)

Water

(l)

P4

Quick A30
Min

5)

Fresh soil

Crockery and

cutlery

• Wash 60 °C

or 65 °C

• Rinses

30

0.9

9

P5

Delicate

Normal or light

soil

Delicate crock-

ery and glass-

ware

• Wash 45 °C

• Rinses

• Dry

70 - 80

0.7 - 0.9

13 - 14

P6
Rinse and Hold 

6)

All

• Prewash

14

0.1

4

P7
Plate Warmer 

7)

All

• Rinse 70 °C

30

0.9

4

1) The pressure and the temperature of the water, the variations of the mains supply, the options and the

quantity of dishes can change the values.

2) With this programme you have the most efficent use of water and energy conumption for crockery and

cutlery with normal soil. (This is the standard programme for test institutes).

3) The appliance senses the degree of soil and the quantity of items in the baskets, it automotically adjusts

the temperature and the quantity of the water, the energy consumption and the programme duration.

4) This programme has a high temperature rising phase for better hygiene results. During the rinsing

phase, the temperature stays at 70 °C for at least 10 minutes.

5) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.

6) Use this programme to quickly rinse the dishes. this prevents the remaining foor to bond on the dishes

and bad odours to come out from the appliance. Do not use detergent with this programme.

7) This programme makes the dishes warm before use or removes the dust from dishes not used for a long

time. Do not use detergent with this programme.

SETTINGS

PROGRAMME SELECTION MODE

 

The appliance is in Programme selection mode when, after the activation, the display shows number of the

programme Eco.

• The display shows the programme duration after some seconds.

6

Содержание ZDT26010FA





















Отзывы: