Zanussi ZDT15010FA, Руководство пользователя

Страница: 5 / 16

Options
Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse aid
and salt. The related indicators are off.
The programme duration can increase.
1. Press the on/off button to activate the ap-
pliance.
2. Make sure that the appliance is in setting
mode, refer to ‘Setting and starting a pro-
gramme'.
3.
Press at the same time and .
• Multitab indicator comes on.
If you stop to use the combi detergent
tablets, before you start to use
separately detergent, rinse aid and
dishwasher salt, do these steps:
1. Set the water softener to the highest level.
2. Make sure that the salt container and the
rinse aid dispenser are full.
3. Start the shortest programme with a rins-
ing phase, without detergent and without
dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse aid.
Acoustic signals
The acoustic signals operate when the appli-
ance has a malfunction. It is not possible to
deactivate this acoustic signal.
There is also an acoustic signal that operates
when the programme is completed. By default,
this acoustic signal is off, but it is possible to
activate it.
How to activate the acoustic signal for
the end of programme
1. Press the on/off button to activate the ap-
pliance. Make sure that the appliance is in
setting mode, refer to “Setting and starting
a programme”.
2. Press and hold, at the same time,
and until the indicators of
, and start to
flash.
3.
Press .
• The indicators of
and
go off.
•
The indicator of continues to flash.
• The end indicator is off.
4.
Press . The end indicator comes on.
The acoustic signal for the end of pro-
gramme is activated.
5. Press the on/off button to deactivate the
appliance and to confirm the setting.
How to deactivate again the acoustic
signal for the end of programme
1. Refer to “How to activate the acoustic sig-
nal for the end of programme” and follow
the procedure from step (1) to step (2).
2.
Press .
• The indicators of
and
go off.
•
The indicator of continues to flash.
• The end indicator comes on.
3.
Press . The end indicator goes off.
The acoustic signal for the end of pro-
gramme is deactivated.
4. Press the on/off button to deactivate the
appliance and to confirm the setting.
5
www.zanussi.com