Zanussi ZDT13012FA, Руководство пользователя

Страница: 6 / 16

Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Level
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
< 4 < 7 < 0.7 < 5
1
2)
1) Factory position.
2) Do not use salt at this level.
Electronic adjustment
1. Press the on/off button to activate the ap-
pliance.
2. If necessary, do the Reset function.
3. Press and hold the programme button until
the programme indicator starts to flash
and the programme indicator
comes on with fixed light.
4.
Wait until the programme indicator
goes off and the end indicator starts to
flash. The programme indicator contin-
ues to flash.
5. Press the programme button. The end indi-
cator starts to flash. The intermittent flash-
ing of the end indicator refers to the cur-
rent set level.
• E.g. 5 f pause + 5 flashes =
level 5.
6. Press the programme button again and
again to change the setting. Each time you
press the programme button the level num-
ber increases.
7. Press the on/off button to deactivate the
appliance and to confirm the setting.
Filling the salt container
Caution! Water and salt can come out
from the salt container when you fill it.
Risk of corrosion. To prevent it, after you fill
the salt container, start a programme.
1 2
3 4
Put 1 litre of water in the salt container (only
for the first time).
6
www.zanussi.com