20
30
A
B
3
20
30
4
Put the detergent or the tablet in compartment
(
A
) If the programme has a prewash phase,
put a small quantity of detergent in compart-
ment (
B
).
Using the combi detergent tablets
When you use tablets, that contain salt and
rinse aid, do not fill the salt container and the
rinse aid dispenser. The rinse aid indicator al-
ways comes on if the rinse aid dispenser is
empty.
1. Adjust the water softener to the lowest lev-
el.
2. Set the rinse aid dispenser to the lowest
position.
If you stop to use the combi detergent
tablets, before you start to use
separately detergent, rinse aid and
dishwasher salt, do these steps:
1. Set the water softener to the highest level.
2. Make sure that the salt container and the
rinse aid dispenser are full.
3. Start the shortest programme with a rins-
ing phase, without detergent and without
dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse aid.
Setting and starting a programme
Reset function
For some settings it is necessary that the ap-
pliance is in user mode.
The appliance is in user mode when all the
programme indicators are on.
To set the appliance in user mode, do the Re-
set function
1. Press and hold the programme button until
all the programme indicators come on.
Starting a programme
1. Open the water tap.
2. Press the on/off button to activate the ap-
pliance.
3. Press the programme button again and
again until only the indicator of the pro-
gramme you want to set is on.
4. Close the appliance door. The programme
starts.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance con-
tinues from the point of interruption.
Cancelling the programme
Do the Reset function.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
The end indicator comes on.
1. Press the on/off button to deactivate the
appliance.
2. Close the water tap.
If you do not press the on/off button, after
few minutes from the end of the pro-
gramme all the indicators go off.
This helps to decrease the energy consump-
tion,
Important
• Let the dishes become cold before you re-
move them from the appliance. Hot dishes
can be easily damaged.
• First remove the items from the lower bas-
ket, then from the upper basket.
• There can be water on the sides and on the
door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.
43
www.zanussi.com
