22
CAUTION!
If the machine is connected to new pipes or pipes which have not been used for a long time, you
should run the water for a few minutes before connecting the inlet hose.
Installation
WARNING!
Any electrical and/or plumbing work required to install this appliance should be carried out by a
qualified electrician and/or plumber or competent person.
WARNING!
Only use, for connection to the water mains,
new hose-set; old hose-set must not be
reused.
Water connection
WARNING!
The dishwasher must not be connected to
open water appliances or instantaneous water
heaters. This dishwasher may be fed with
either hot (max. 60°) or cold water.
Nevertheless we advise you a cold water
supply.
Water inlet hose with safety valve
Connect the inlet hose to a water tap with an
external thread of 3/4”.
After connecting the double-walled water inlet hose,
the safety valve is next to the tap.
If the water inlet hose leaks, the safety valve cuts off
the water supply.
WARNING!
The electrical cable for the safety valve is in the
double-walled water inlet hose and is live.
Therefore do not immerse the water inlet hose or the
safety valve in water.
Take care when installing the water inlet hose.
Place the water inlet hose in such a way that it is
always lower than the bottom edge of the safety
valve.
If the water inlet hose or the safety valve is
danaged, remove the mains plug immediately.
ATTENTION!
A water inlet hose with safety valve MUST only be
replaced by your local Service Force Centre.
156997240en.qxp 12/27/2006 1:39 PM Page 22
Содержание ZDT110
Страница 1: ...User manual Dishwasher ZDT 110 156997240en qxp 12 27 2006 1 39 PM Page 1 ...
Страница 29: ...29 Notes 156997240en qxp 12 27 2006 1 39 PM Page 29 ...
Страница 30: ...30 Notes 156997240en qxp 12 27 2006 1 39 PM Page 30 ...
Страница 31: ...31 Notes 156997240en qxp 12 27 2006 1 39 PM Page 31 ...