Zanussi ZDS 201 Скачать руководство пользователя страница 10

1

2

Do these steps to move the upper basket to the higher po-

sition:
1. Move the front runner stops (A) out.
2. Pull the basket out.
3. Put the basket in the higher or lower position.
4. Put back the front runner stops (A) in their initial po-

sition.

Caution! If the basket is in the higher position, do

not put cups on the cup racks.

Select and start a washing programme

Starting the washing programme without delay start

1. Close the appliance door.
2. Set the washing programme. Refer to 'Washing pro-

grammes'. The on/off indicator comes on.

3. Press the start/cancel button, the washing programme

starts automatically. The start/cancel indicator comes

on.

Starting the washing programme with delay start

1. Close the appliance door.
2. Set the washing programme. Refer to 'Washing pro-

grammes'. The on/off indicator comes on.

3. Press the delay start button. The delay start indicator

comes on.

4. Press the start/cancel button, the countdown starts

automatically.
• When the countdown is completed, the washing

programme starts automatically. The delay start in-

dicator goes off.

The opening of the appliance door interrupts the

countdown. When you close the door, the count-

down continues from the point of interruption.

Cancelling the delay start

If the delay start has not started, you can change the se-

lection.

To change the selection while the delay start operates, it is

necessary to cancel the delay start.
1. Press and hold the start/cancel button until the start/

cancel indicator and the delay start indicator go off.

2. Press the start/cancel button to start the washing pro-

gramme.

Interruption of a washing programme

• Open the appliance door.

– The washing programme stops.

• Close the appliance door.

– The washing programme continues from the point

of interruption.

Cancelling the washing programme

If the washing programme has not started, you can change

the selection.

To change the selection while the washing programme

operates, it is necessary to cancel the programme.
• Press and hold the start/cancel button until the start/

cancel indicator goes off.

Make sure that there is detergent in the detergent

dispenser before you start a new washing pro-

gramme.

End of the washing programme

When the washing programme is completed, the end indi-

cator comes on.

Deactivate the appliance and open the appliance door.

For better drying results, keep the appliance door

ajar for some minutes.

Remove the items from the baskets

• Let the dishes become cold before you remove them

from the appliance. Hot dishes can be easily damaged.

• First remove the items from the lower basket, then from

the upper basket.

• There can be water on the sides and on the door of the

appliance. Stainless steel becomes cool more quickly

than the dishes.

10

 

Содержание ZDS 201

















Отзывы: