Zanussi ZDP7203PZ, Руководство пользователя

Страница: 10 / 16

You can remove the laundry before the crease
guard phase is completed. We recommend, for
better results, that you remove the laundry when the
phase is almost completed or completed.
When the crease guard phase is completed:
• The indicators Filter and Tank comes on.
• Start/Pause indicator goes off.
1. Press the on/off button to deactivate the
appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Always clean the filter and empty the
water container when a programme is
completed.
STAND-BY FUNCTION
To decrease the energy consumption, this function
automatically deactivates the appliance:
• After 5 minutes if you do not start the
programme.
• After 5 minutes from the end of the programme.
HINTS AND TIPS
PREPARING THE LAUNDRY
• Close the zippers.
• Close the fasteners of the duvet covers.
• Do not keep ties or ribbons loose (e.g. apron
ribbons). Tie them before you start a
programme.
• Remove all items from the pockets.
• If an item has the internal layer made of cotton,
turn it inside out. Make sure that the cotton layer
is always external
• We recommend that you set the correct
programme applicable for the type of fabrics
that are in the appliance.
• Do not put fabrics with strong colours together
with fabrics with light colours. Strong colours
can bleed.
• Use an applicable programme for cotton jersey
and knitwear to prevent the items to shrink.
• Make sure that the laundry weight is not more
than the maximum weight that is in the
programme table.
• Dry only the laundry that is applicable for tumble
dryer. Refer to the fabric label on the items.
Fabric label Description
Laundry that is applicable for tumble dryer.
Laundry that is applicable for tumble dryer. Set the programme with standard
temperature.
Laundry that is applicable for tumble dryer. Set the programme with low tempera-
ture.
Laundry that is not applicable for tumble dryer.
10