Zanussi ZDI430 Скачать руководство пользователя страница 6

Страница: 6 / 28

Up and down programme selection

buttons

Using these two buttons you have an increasing or a

decreasing order in the selection of the programme

(see "Washing programmes" chart for the number of

the programme).
•

Starting the washing programme:

1. Press the On/Off button. The On/Off light will il-

luminate and the indicator lights of the pro-

gramme selection buttons will illuminate and in

the digital display are visible 2 horizontal lines (-

-).

2. To select a programme, press either one of the

two programme selection buttons, until the num-

ber of chosen programme appears on the dis-

play.

3. Select if desired, within 3 seconds, the half load

option (check that the option is available with the

selected washing programme).

4. After about 3 seconds from the last pressure of

a button the programme starts automatically. In

the digital display appears the running time of the

programme and the indicator lights of the pro-

gramme selection buttons remain illuminated

with a fixed light.

•

Cancel the washing programme in progress:

1. Press the function buttons B and C simulta-

neously for about 2 seconds, the indicator

lights of the programme selection buttons will

start flashing. After about 2 seconds the indi-

cator lights of the programme selection but-

tons will illuminate with a fixed light and 2 hor-

izontal lines (- -) will appear in the digital dis-

play.

2. Switch off the machine by pressing the On/Off

button or select a new washing programme

(check that there is detergent in the detergent

dispenser.

Содержание ZDI430





























Результаты поиска

Содержание ZDI430

Отзывы:

Похожие инструкции для ZDI430

Бренды по названию

Популярные бренды

Zanussi ZDI430, Руководство пользователя

Результаты поиска

Содержание ZDI430

Отзывы:

Похожие инструкции для ZDI430

Бренды по названию

Популярные бренды