Before using your dishwasher for the
first time:
1. Ensure that the electrical and water connections comply
with the installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and then fill
with salt
5. Fill the rinse aid dispenser.
Setting the water softener
The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would
have a detrimental or adverse effect on the operation of the
appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, German
degrees, French degrees and PPM (parts per Million).
The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise
you on the hardness of the water in your area.
The dishwasher is factory set at level 3.
If this level is not suitable for your area the softener should be
adjusted.
If your water is level 1 it is already soft and therefore
there is no need to use salt.
With the setting of the water softener at level 1 the salt
indicator light on the control panel will always remain off.
Use salt from level 2 upwards.
To select a different level be sure that the
dishwasher is off and then proceed as follows:
1. Press Normal 65°C and Quick 55°C programme push
buttons simultaneously.
2. While keeping the programme push buttons Normal 65°C
and Quick 55°C pressed, switch on the dishwasher by
pressing the On/Off push button. The On/Off indicator light
comes on. At the same time, the indicator lights of the
Normal 65°C and Quick 55°C push button start flashing.
Press the Normal 65°C programme push button, the
indicator light of the Quick 55°C programme push button
turns off, while the indicator light of the Normal 65°C
programme push button remains fixed for about 5 seconds
and then starts to flash indicating the current level of the
water softener.
The current level is indicated by the number of flashes
made by the Normal 65°C indicator light, that alternates 5
seconds off with a number of flashes, this for about 60
seconds.
Example:
1 flash
=
level 1
2 flashes
=
level 2
3 flashes
=
level 3
4 flashes
=
level 4
5 flashes
=
level 5
3. To change the level, press the Normal 65°C programme
push button. Each time the push button is pressed the level
changes.
Examples:
if the current level is 3, pressing only one time the
Normal 65°C programme push button, level 4 is selected.
if the current level is 5, pressing only one time the
Normal 65°C programme push button, level 1 is selected.
The Normal 65°C indicator light remains off for about 5
seconds after which starts flashing indicating the new level
selected.
4. To memorise the new level, switch off the dishwasher by
pressing the On/Off push button.
5
Before use
Level
Use of
salt
French
degrees
(°TH)
PPM
(Parts per
Million)
German
degrees
(°dH)
1
2
3
4
5
NO
YES
YES
YES
YES
< 4
4 - 18
19 - 29
30 - 40
41 - 50
< 8
8 - 30
31 - 50
51 - 70
71 - 90
< 80
81 - 300
301 - 500
501 - 700
701 - 900
Water hardness
SO443
SO444
Содержание ZDI 6744
Страница 1: ...DISHWASHER ZDI 6744 Instruction book KOR ...
