Zanussi ZDF310, Инструкция

Страница: 7 / 22

Indicator lights:
have the following meanings:
The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary.
"3 in 1" function
This appliance is equipped with the 3 in 1 function, that allows
the use of the "3 in 1" combi detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Select the 3 in 1 function before the set of a washing
programme.
Once selected this option (indicator light illuminated) it will
remain active also for the following washing programmes.
With the use of "3 in 1" function, the cycle durations given in
the "Washing programmes" chart may change.
NOTE: Once the programme is running, the 3 in 1 function
can NO longer be changed. If you want to exclude the 3 in 1
function you have to cancel the programme setting (see
chapter "Starting a washing programme" - "To cancel a
washing programme in progress") and then deactivate the 3 in
1 function.
In this case you have to set a washing programme (and
eventual options) again.
Activation/deactivation of the 3 in 1 function
(The dishwasher must be switched off)
1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).
I
f other indicator lights are on, this means that a wash
programme has been selected. The programme must be
cancelled: press simultaneously the function buttons 2 and
3 for about 2 seconds. All the indicator lights will turn off
(except for the On/Off indicator light and eventually salt
and rinse aid indicator lights) indicating that the set
programme has been cancelled and the machine is now in
setting mode.
2. Press simultaneously function buttons 2 and 3, until the
indicator lights of the function buttons 1, 2, 3 and 4 start
flashing.
3. Press the function button 4, the indicator lights of function
buttons 1, 2 and 3 turn off while the indicator light of the
function button 4 goes on flashing.
4. Press the function button 4 again, the "3 in 1" indicator light
illuminates, indicating that the 3 in 1 function" is active.
To deactivate the function press the function button 4 again,
the indicator light turns off.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
NOTE: if the drying results are not satisfactory it is possible to
activate only the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can only
be possible with the 3 in 1 function active.
Activation/deactivation of the rinse aid
dispenser
(The dishwasher must be switched off)
When the rinse aid dispenser has been activated, the rinse
aid indicator light on the control panel is automatically
activated.
1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).
If a programme button indicator light is on, this means that
a washing programme has been set. The programme must
be cancelled: press simultaneously the function buttons 2
and 3 for about 2 seconds.
All the indicator lights will turn off (except for the On/Off
indicator light) indicating that the set programme has been
cancelled and the machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, until the
indicator lights of the function buttons 1, 2, 3 and 4 start
flashing.
3. Press the function button 2, the indicator lights of function
buttons 1, 3 and 4 turn off while the indicator light of the
function button 2 goes on flashing.
4. To activate the rinse aid dispenser, press the function button
2 again, the indicator light end of programme illuminates,
indicating that the rinse aid dispenser has been activated.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
To deactivate the rinse aid dispenser again, follow the above
instructions until the indicator light end of programme turns
off.
25
Programme in progress: illuminates when a
washing programme has been set and remains
illuminated for all the duration of the washing
programme.
Turns off when the washing programme has
ended.
When delay start has been set, this indicator light
turns off and will come on again once the
countdown has elapsed and the washing
programme has started.
End of programme: illuminates when the washing
programme has ended.
It also has added functions of visual signalling as:
- the setting of the water softener,
- activation/deactivation of the rinse aid dispenser,
- intervention of an alarm due to the malfunction
of the machine.
3 in 1 function: indicates the
activation/deactivation of the 3 in 1 function (see
"3 in 1 function").
salt refilling indicator light, illuminates when the salt
has run out.
rinse aid refilling indicator light, illuminates when
the rinse aid has run out.
3 in1 function active indicator light on
3 in 1 function not active indicator light off