Control panel and functions
●
Never use the dishwasher if the electrical
supply cable and water hoses are damaged;
or if the control panel, work top or plinth area
are damaged such that the inside of the
appliance is freely accessible. Contact your
local Service Force centre, in order to avoid
hazard.
4
Programme selector dial and
On/Off switch
Start/Cancel
button
Delay start
button
Salt refilling
light
End of programme
light
●
All sides of the dishwasher must never be
drilled to prevent damage to hydraulic and
electric components.
WARNING!
For electrical and water connection carefully
follow the instructions given in specific
paragraphs.
Programme selector
dial
and
On/Off switch
●
when in this position, the machine is switched off (corresponding light off),
●
when the marker on the dial corresponds with a programme, the machine
is switched on and a programme is selected (corresponding light on)
Start/Cancel
button
●
Starting the washing programme:
1. Select a washing programme.
2. Press the Start/Cancel button (corresponding light on).
IMPORTANT!
Once the programme has started, if you want to change the selection made
you must cancel the washing programme in progress.
●
Cancel the washing programme in progress:
1. Press and hold the Start/Cancel button until the corresponding light
turns off.
2. Release the Start/Cancel button.
3. Turn the programme selector dial to the Off position or select a new
washing programme (check that there is detergent in the detergent
dispenser).
156999310en.qxp 11/28/2005 2:27 PM Pagina 4
