Zanussi ZDF14001KA, Руководство пользователя

Страница: 8 / 16

Using the detergent
1
2
1
2
20
30
A
B
3
20
30
4
Put the detergent or the tablet in compartment
(
A ) If the programme has a prewash phase,
put a small quantity of detergent in compart-
ment (
B ).
Setting and starting a programme
Setting mode
For some settings it is necessary that the ap-
pliance is in setting mode.
The appliance is in setting mode when, after
the activation the programme duration flashes
in the display.
If the control panel does not show this condi-
tion, press and hold, at the same time,
Multi-
tab and Delay until the appliance is in setting
mode.
Starting a programme without delay start
1. Open the water tap.
2. Press the on/off button to activate the ap-
pliance.
3. Close the appliance door.
4. Turn the knob until the programme marker
is aligned with the programme you want to
set.
• The duration of the programme flashes
in the display.
5. Press Start .
• The programme starts and the indicator
of the running phase is on.
• The programme duration starts to de-
crease with steps of 1 minute.
Starting a programme with delay start
1. Set the programme.
2. Press Delay again and again until the dis-
play shows the delay time you want to set
(from 1 to 24 hours).
• The delay time flashes in the display.
3. Press Start .
• The countdown starts to decreases with
steps of 1 hour.
When the countdown is completed, the pro-
gramme starts and the indicator of the running
phase comes on.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance con-
tinues from the point of interruption.
Cancelling the delay start while the
countdown operates
1. Press and hold, at the same time, Multi-
tab and Delay until the programme dura-
tion flashes in the display.
2. Press Start to start the programme.
Cancelling the programme
1. Press and hold, at the same time, Multi-
tab and Delay until the programme dura-
tion flashes in the display.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
The display shows 0:00 and the phase indica-
tors go off.
1. Press the on/off button to deactivate the
appliance.
8
www.zanussi.com