4. Add the detergent.
5. Start the programme.
Using the detergent
1
2
1
2
20
30
A
B
3
20
30
4
Put the detergent or the tablet in compartment
(
A
) If the programme has a prewash phase, put
a small quantity of detergent in compartment
(
B
).
Using the combi detergent tablets
When you use tablets, that contain salt and
rinse aid, do not fill the salt container and the
rinse aid dispenser. The rinse aid indicator al-
ways comes on if the rinse aid dispenser is
empty.
1. Adjust the water softener to the lowest level.
2. Set the rinse aid dispenser to the lowest po-
sition.
If you stop to use the combi detergent
tablets, before you start to use separately
detergent, rinse aid and dishwasher salt,
do these steps:
1. Set the water softener to the highest level.
2. Make sure that the salt container and the
rinse aid dispenser are full.
3. Start the shortest programme with a rinsing
phase, without detergent and without
dishes.
4. Adjust the water softener to the water hard-
ness in your area.
5. Adjust the released quantity of rinse aid.
Setting and starting a programme
Setting mode
The appliance must be in setting mode to
start a programme.
Turn the programme knob until the programme
marker is aligned with a programme on the con-
trol panel. If comes on and
starts to flash
the appliance is in setting mode.
If the control panel does not show this condi-
tion, press and hold, at the same time
and
until the appliance is in setting mode
Starting a programme
1. Open the water tap.
2. Close the appliance door.
3. Turn the knob until the programme marker is
aligned with the symbol of the programme
you want to set.
•
comes on.
•
starts to flash.
4. Press to start the programme.
•
and
are on.
Opening the door while the appliance
operates
If you open the door, the appliance stops. When
you close the door, the appliance continues
from the point of interruption.
Cancelling the programme
1. Press and hold
and until
starts to
flash.
Make sure that there is detergent in the de-
tergent dispenser before you start a new
programme.
At the end of the programme
When the programme is completed
comes
on. If you do not deactivate the appliance within
5 minutes all indicators goes off. This helps to
decrease energy consumption.
7
www.zanussi.com
Содержание ZDF11001WA
Страница 1: ...EN User manual Dishwasher ZDF11001WA ...
Страница 12: ...www zanussi com shop 156966970 A 292013 ...