Once this function is selected it will remain ac-
tive also for the following washing programmes.
With the selection of this function the inflow of
rinse aid and salt from each respective supply
container is automatically deactivated and also
the indicator lights for salt and rinse aid are de-
activated.
Select the "Multi-Tab function" before the start
of a washing programme.
With the use of the "Multi-Tab function", the cy-
cle durations may change.
Once the programme is running, the "Multi-Tab
function" can
NO
longer be changed.
If you want to exclude the "Multi-Tab function"
you have to cancel the programme setting and
then deactivate the "Multi-Tab function". In this
case you have to set a washing programme
(and desired options) again.
Activation/deactivation of the Multi-Tab
function
Press simultaneously the two buttons posi-
tioned over the Multi-Tab symbol, until the
"Multi-Tab function "indicator light illuminates.
This means that the function is active.
To deactivate the function press the same but-
tons again until the indicator light correspond-
ing to the "Multi-Tab function" symbol turns off.
If the drying results are not satisfactory we
suggest that you:
1. Fill up the rinse aid dispenser with rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position 2.
• The activation/deactivation of the rinse aid
dispenser can only be possible with the
"Multi-tab" function active.
Activation/deactivation of the rinse aid
dispenser
1. Press the On/Off button. The dishwasher
must be in setting mode.
2. Press simultaneously buttons
B
and
C
, un-
til the lights of buttons
A
,
B
, and
C
start
flashing.
3. Press button
B
, the lights of buttons
A
and
C
turn off while the light of button
B
goes
on flashing. The digital display indicates the
current setting:
= Rinse aid dispenser
deactivated.
4. To change the setting, press button
B
again, the digital display indicates the new
setting:
= Rinse aid dispenser acti-
vated.
5. To memorise the operation, switch off the
dishwasher by pressing the On/Off button.
If you decide to turn back to the use of standard
detergent system we advise that you:
1. Deactivate the "Multi-tab" function.
2. Fill up the salt container and the rinse aid
dispenser again.
3. Adjust the water hardness setting to the
highest setting and perform 1 normal wash-
ing programme without loading any dishes.
4. Adjust the water hardness setting accord-
ing to the hardness of the water in your
area.
5. Adjust the rinse aid dosage.
18
