Zanussi ZDF 2010, Руководство пользователя

Страница: 9 / 16

When you use tablets, that contain salt and
rinse aid, do not fill the salt container and the
rinse aid dispenser. The rinse aid indicator al-
ways comes on if the rinse aid dispenser is
empty.
1. Adjust the water softener to the lowest lev-
el.
2. Set the rinse aid dispenser to the lowest
position.
If you stop to use the combi detergent
tablets, before you start to use separately
detergent, rinse aid and dishwasher salt,
do these steps:
1. Turn the programme knob until the pro-
gramme marker is aligned with the shortest
programme with a rinsing phase.
2. Set the water softener to the highest level.
3. Make sure that the salt container and the
rinse aid dispenser are full.
4. Start the set programme, without detergent
and without dishes.
5. Adjust the water softener to the water hard-
ness in your area.
6. Adjust the released quantity of rinse aid.
Setting and starting a programme
Setting mode
The appliance must be in setting mode to
start a programme.
• Turn the programme knob until the pro-
gramme marker is aligned with a programme
on the control panel. If the on/off indicator
comes on, the appliance is in setting mode.
• Turn the programme knob until the pro-
gramme marker is aligned with a programme
on the control panel. If the on/off indicator
and the start indicator come on, the appli-
ance is not in setting mode.
To put the appliance in setting mode, press and
hold the start button until the start indicator
goes off .
Starting a programme
1. Open the water tap.
2. Close the appliance door.
3. Turn the programme knob until the pro-
gramme marker is aligned with the pro-
gramme you want to set. The on/off indica-
tor comes on.
4. Press the start button, the programme
starts. The start indicator comes on.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance contin-
ues from the point of interruption.
Cancelling the programme
Press and hold the start button until the start in-
dicator goes off .
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
When the programme is completed, the end in-
dicator comes on.
1. Deactivate the appliance. Turn the pro-
gramme knob until the programme marker is
aligned with the on/off indicator.
2. Close the water tap.
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
9
www.zanussi.com