Zanussi ZDEB 47209W, Руководство пользователя

Страница: 11 / 16

Problem Possible cause Remedy
hours the drying cycle ends auto-
matically.
Load volume too big. Reduce load volume.
Laundry insufficiently spun. Laundry must be adequately spun.
1) Only dryers with conductance programming
2) Only dryers with removable filter
Machine settings
Setting Implementation
BUZZER permanent off 1. Turn the programme selector to any programme.
2. Press simultaneously the DELICATE and ANTI-CREASE buttons
and hold down for approx. 5 seconds.
3. The buzzer is by default always off.
Water hardness
Water contains, a variable quan-
tity of limestone and mineral
salts of which quantities vary ac-
cording to geographical loca-
tions thus varying its conductivi-
ty values.
Relevant variations of the con-
ductivity of the water compared
to those prefixed by the factory
could slightly influence the re-
sidual humidity of the laundry at
the end of the cycle. Your dryer
allows you to regulate the sensi-
tivity of the drying sensor based
on conductivity values of the
water.
1. Turn the programme selector to any programme.
2. Press simultaneously the ANTI-CREASE and START/PAUSE but-
tons and hold down for approx. 5 seconds. Lights show the current
setting:
– END - low conductivity <300 micro S/cm
– DRYING - medium conductivity 300-600 micro S/cm
– DRYING and END - high conductivity >600 micro S/cm
3. Press the START/PAUSE button sequentially until you set desired
level.
4. To memorize setting press simultaneously the the ANTI-CREASE and
START/PAUSE buttons or turn knob to OFF position
Technical data
Dimensions (mm) Width / Height / Depth 85 x 60 x 58 cm
Max. depth
(with the appliance door open) 1090 mm
Max. width
(with the appliance door open) 950 mm
Electrical connection Voltage 230-240 V
Frequency 50 Hz
Fuse 13 A
Total power 2600 W
Drum volume 108 l
Weight of the appliance 32,5 kg
Laundry: max. weight 7 kg
11
www.zanussi.com