Zanussi ZDC47200W, Руководство пользователя

Страница: 11 / 16

In both cases the light of the Start/Pause button flashes to
remind you that the start button needs to be pressed
again.
Indicator lights
These lights indicate the following functions:
• Drying light: This light indicates that the appliance is in
the drying phase.
• End/Anti-crease light: This light is on at the end of the
cooling phase, during the anticreasing phase and at the
end of the programme.
• Tank light: This light indicates that the appliance is in
the drying phase. This light comes on at the end of the
programme to remind you that the water reservoir must
be emptied out. If this light illuminates during a pro-
gramme this means that the water reservoir is full. The
buzzer sounds, the programme stops, the light of the
Start/Pause (Start/Pause) button flashes. This light
comes on also when the water reservoir is not inserted
correctly.
• Filter light: This light illuminates at the end of the pro-
gramme to remind you that the filters must be cleaned.
• Condenser light: It comes on every 80 cycles to remind
you that the condenser must be cleaned.
Changing programme
To change a programme which has been selected by mis-
take once the programme has started, first turn the pro-
gramme selector to OFF position. The programme is
cancelled.
The programme can no longer be changed directly
once the programme has started. If nevertheless
there is an attempt to change the programme on the pro-
gramme knob or if an function button (excluding the BUZ-
ZER button
1)
) is pressed, led on the START/PAUSE button
starts flashing temporarily in red. The drying programme
is not however affected by this (laundry protection).
At the end of the programme
If the laundry is not removed at the end of the cycle, the
dryer performs an anticreasing phase (duration: 30 mi-
nutes maximum).
If you do not remove the laundry, the dryer will stop auto-
matically at the end of the anticreasing phase. Lights End/
Anti-crease , Filter and Tank remain lit and the buzzer
sounds for 2 minutes.
Turn the programme selector dial to to switch the ma-
chine off. Remove the laundry from the drum and carefully
check that the drum is empty.
If you do not intend to carry out another wash, close the
water tap. Leave the door open to prevent the formation of
mildew and unpleasant smells.
If you open and then close the door before turning
the selector dial to all the lights corresponding
to the phases making up the performed programme come
on.
After each use
• Clean the filters.
• Empty the water reservoir.
Cleaning and maintenance
Cleaning lint filters
To ensure that the appliance works perfectly, the lint filters
in the door and in front of the drum must be cleaned after
every drying cycle.
Caution! Important. Never operate the dryer without
the lint filter or with a damaged or blocked lint filter.
1) Only dryers with buzzer button
11