13
The duration value will be gradually adjusted
during the execution of the drying cycle.
7.
Press the SPIN button repeatedly, in order to
select the real spin speed that your laundry has
been spun. The selected spin level will be shown
on the third row above to the spin button.
8.
Press the «Options» button to select the required
options.
To confirm your choice press the «Change»
button.
Depending on the selected programme only
certain options are available and shown during
the selection phase.
Note: Not all the options are compatible
between themselves. The incompatible option
icons will disappear.
9.
Select the DELAY START option if required.
Before you start the programme choose the
required option.
The selected delay time value (up to 20 hours)
will appear on the display while selecting.
The end cycle will be updated and shown on the
relative position of the display.
Change
Options
Exit
Delay Start
Start in 30 min
11.25
Door
Spin
Change
Options
Exit
Delay Start
No
10.55
Door
Spin
Change
Options
Exit
Cotton extra
Cycle end at
08.30
10.55
1200
Door
Spin
Change
Options
Exit
Cotton extra
Cycle end at
08.30
10.55
1200
Door
Spin
Cotton extra dry
Ready to wear
Iron dry
Slightly damp
Store dry
Machine iron dry
Store dry Synthetic extra dry
Iron dry
Baby
Memory1
Memory2
Reset/
Off
60
min
30
min
Cooling
10.
Press the START/PAUSE button. The relevant
light will stop flashing. The message relevant to
the phase that is in progress will be shown in the
display.
If you have chosen a delayed start, the tumble
dryer will begin the countdown.
If the programme selector dial is turned to another
position, when the machine is running, the buzzer
will sound and the «
Selection error
» message
appears in the display.
The drum turns alternately in both directions
during drying.
All drying programmes end with a 10 minute
cooling phase (on the second row of the display
appears the «
Cooling
» message).
You may remove the laundry after this phase.
The display shows the following messages one
after an other: «
Please clean the filters
» and
«
Please empty the tank
». The buzzer sounds to
indicate the end of the cycle.
11.
If the laundry is not removed at the end of the
cycle, the dryer performs an
anti-creasing
phase
(duration: 30 minutes maximum).
If you do not remove the laundry, the dryer will
stop automatically at the end of the anti-creasing
phase. The display will show the following
messages one after an other: «
Anticrease
»,
«
Please clean the filters
» and «
Please empty the
tank
». The buzzer sounds to indicate the end of
the cycle.
The light of the START/PAUSE button goes off
and a flashing zero appears on the display.
12.
Turn the programme selector dial to “
RESET/
OFF
”; all the lights go out. The appliance is
switched off.
Remove the laundry.
If you open and then close the door before
turning the programme selector dial to
“RESET/OFF”, the machine is ready to
perform another drying programme. The
display shows the selected programme,
duration of the programme and the options
required.
Change
Options
Exit
Cotton extra
Drying
08.30
10.55
1200
Door
Spin
Start/
Pause
125981241.qxp 2006-01-04 13:14 Page 13
