18
Installation
Positioning
Place the refrigerator away from direct sunlight and
heat sources.
Maintain recommended ventilation - see Fig. 1.
Make sure the refrigerator is accurately levelled tur-
ning the adjustable feet in order to avoid vibrations
and noises, Fig. 2.
This is a built in design to be aligned with other fur-
niture
The appliance must be located in places of maxi-
mum temperature as follows:
If the temperature are higher than these both above
mentioned, the functions of appliance coudl result
reduced.
Cleaning the interior
Do not use alcohol or any cleanig product containing
alcohol because it can damage the cabinet.
Before using the appliance for the first time wash the
interior whith luke warm water and some neutral
soap so as to remove the typical smell of a brand-
new product arid then dry thoroughly.
Do not use detergents or abrasive powders as these
will damage the finish.
Remove security used for transportation.
Electrical connection
m
Before plugging the appliance make sure that the
voltage and frequency shown on the «Technical
Features» correspond to your home supply.
m
It is essential that the appliance be efficiently
earthed.
For this purpose the supply cable plug incorporates
a special earth contact. If the sockets of your domes-
tic wiring system are not grounded, have the
appliance connected to a separate ground wire in
accordance with existing safety regulations.
«THE MANUFACTURER DECLINES TO
ACCEPT ANY LIABILITY IF THIS SAFETY
RULE IS NOT OBSERVED».
Starting up
Plug the appliance into the mains.
Make sure the inner light turns on when opening the
door.
Turn to intermediate position the knobs of the «tem-
perature regulator» «A».
Fig. 2
Fig. 1
SN
+10 to +32ºC
N
+16 to +32ºC
ST
+18 to +38ºC
T
+18 to +43ºC
