Problem
Possible cause
Remedy
The water in the cavity em-
bossment does not boil.
The temperature is too low.
Set the temperature at least to
110°C. Refer to "Hints and
Tips" chapter.
The water comes out of the
cavity embossment.
There is to much water in the
cavity embossment.
Deactivate the oven and make
sure that the appliance is cold.
Wipe the water with a cloth or
sponge. Add the correct
amount of water to the cavity
embossment. Refer to "Activat-
ing the Plus Steam function".
SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
the oven cavity. Do not remove the rating plate from
the oven cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
ENERGY EFFICIENCY
PRODUCT INFORMATION FOR HOB ACCORDING TO EU 66/2014
Model identification
ZCV69068XE
Type of hob
Hob inside Freestanding Cooker
Number of cooking zones
4
Heating technology
Radiant Heater
Diameter of circular cooking
zones (Ø)
Left front
Left rear
Right front
Right rear
18.0 cm
14.5 cm
14.5 cm
18.0 cm
Energy consumption per cooking
zone (EC electric cooking)
Left front
Left rear
Right front
Right rear
177.3 Wh/kg
180.3 Wh/kg
180.3 Wh/kg
179.4 Wh/kg
Energy consumption of the hob (EC electric hob)
179.3 Wh/kg
24
Содержание ZCV69068XE
Страница 1: ...GETTING STARTED EASY User Manual ZCV69068XE EN User Manual Cooker ...
Страница 27: ...27 ...
Страница 28: ...WWW ZANUSSI COM SHOP 867337943 C 252019 ...