
LEVELLING OF THE APPLIANCE
Use small feet on the bottom of appliance to set the
appliance top surface level with other surfaces.
ANTI-TILT PROTECTION
Set the correct height and area for the appliance
before you attach the anti-tilt protection.
CAUTION! Make sure you install the
anti-tilt protection at the correct
height.
Make sure that the surface behind the
appliance is smooth.
You must install the anti-tilt protection. If you do not
install it, the appliance can tilt.
Your appliance has the symbol shown on the
picture (if applicable) to remind you about the
installation of the anti-tilt protection.
1. Install the anti-tilt protection 232 - 237 mm
down from the top surface of the appliance and
110 - 115 mm from the side of the appliance
into the circular hole on a bracket. Screw it into
the solid material or use applicable
reinforcement (wall).
110-115
mm
232- 237
mm
2. You can find the hole on the left side at the
back of the appliance. Lift the front of the
appliance and put it in the middle of the space
between the cupboards. If the space between
the bench cupboards is larger than the width of
the appliance, you must adjust the side
measurement to centre the appliance.
If you changed the dimensions of the
cooker, you must align the non-tip
device correctly.
CAUTION! If the space between the
bench cupboards is larger than the
width of the appliance, you must
adjust the side measurement to the
centre of the appliance.
ELECTRICAL INSTALLATION
WARNING! The manufacturer is not
responsible if you do not follow the
safety precautions from Safety
chapters.
This appliance is supplied without a main plug or a
main cable.
WARNING! Before you connect the
mains cable to the terminal, measure
the voltage between phases in the
house network. Then, refer to the
connection label at the back of the
appliance to use the correct electrical
installation. This order of steps
prevents from installation errors and
damage to the electrical components
of the appliance.
7