20
Something not working
If the aplliance is not working correctly, please carry out the following checks, before contacting your local
Zanussi Service Centre.
IMPORTANT:
If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
SYMPTOM
■
There is no spark when lighting the gas
■
The gas ring burns unevenly
■
The oven does not come on
■
The oven temperature light does not come on
■
The oven light does not come on
■
It takes too long to finish the dishes, or they are
cooked too fast.
■
Steam and condensation settle on the food and the
oven cavity.
■
The timer does not work
■
The oven fan is noisy
SOLUTION
◆
Check that the unit is plugged in and the electrical
supply is switched on
◆
Check that the RCCB has not tripped (if fitted)
◆
Check the mains fuse has not blown
◆
Check the burner cap and crown have been
replaced correctly, e.g. after cleaning.
◆
Check the main jet is not blocked and the burner
crown is clear of food particles.
◆
Check the burner cap and crown have been
replaced correctly, e.g. after cleaning.
◆
Check the oven is in manual operation and that
both a cooking function and temperature have been
selected.
◆
Check the oven is wired in properly, and the
socket switch or the switch from the mains supply to
the oven are ON.
◆
Select a temperature with the thermostat control
knob
◆
Select a function with the oven function control
knob.
◆
Check the light bulb, and replace it if necessary
(see "Replacing the Oven Light")
◆
The temperature may need adjusting
◆
Refer to the contents of this booklet, especially to
the chapter “Using the Oven”.
◆
Leave dishes inside the oven no longer than 15-20
minutes after the cooking is completed.
◆
Check the instructions for the timer.
◆
Check the grease filter is correctly fitted.
◆
Check that shelves and bakeware are not vibrating
in contact with the oven back panel.