![Zanussi ZCL911W Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/zanussi/zcl911w/zcl911w_instruction-booklet_923761008.webp)
8
Zanussi 818 20 92-00/0
Something Not Working
Before
contacting your local Service Force Centre check the following points:
Symptom
Solution
The temperature is too high inside the
refrigerator.
Set a lower temperature.
Put food products in the right place inside the refrigerator. See
the chapter "Temperature inside the refrigerator".
Distribute the food products to allow cold air to circulate
around them.
Make sure that the door is completely closed and that the
rubber door seal is complete and clean.
The temperature where the cabinet is placed is above normal
room temperature.
It is too cold inside the refrigerator.
Set a warmer temperature.
See the section"To start the fridge and thermostat control".
There is water on the cooling plate inside
the refrigerator.
This is normal. During automatic defrosting, frost thaws on the
cooling plate.
Water is running inside the refrigerator.
Clean the water drain and drain hole inside the refrigerator
using a piece of flexible curtain wire.
Food products could have been placed near the rear of the
appliance, preventing the water from running into the drain.
Water comes out on the floor.
Place the drain hose at the back of the appliance above the
drain bowl. See the chapter "Before use"
The compressor operates continuously.
Set a warmer temperature.
Make sure that the door is completely closed and that the
rubber door seal is complete and clean.
The temperature where the cabinet is placed is above normal
room temperature.
The cabinet does not operate at all.
Cooling or interior light does not
operate. No indicator lamps light.
The appliance is not switched on.
Power does not reach the appliance. (Try connecting another
electrical device to the power outlet.)
The fuse has blown.
The power plug is not properly connected.
Noise
See "Normal operating Sounds" in chapter
Hints and Tips.
If the cushion spacers (between the cabinet wall and pipes)
come loose, put them back in place again.
Carefully follow the instructions in the chapter "Installing the
cabinet".