Use the same oven lamp type.
4. Install the glass cover.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
Possible cause
Remedy
You cannot activate the appli-
ance.
The appliance is not connec-
ted to an electrical supply or it
is connected incorrectly.
Check if the appliance is cor-
rectly connected to the electri-
cal supply.
You cannot activate the appli-
ance.
The fuse is blown.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
You cannot activate or operate
the hob.
You touched 2 or more sensor
fields at the same time.
Touch only one sensor field.
You cannot activate or operate
the hob.
There is water or fat stains on
the control panel.
Clean the control panel.
An acoustic signal sounds and
the hob deactivates.
An acoustic signal sounds
when the hob is deactivated.
You put something on one or
more sensor fields.
Remove the object from the
sensor fields.
Residual heat indicator does
not come on.
The zone is not hot because it
operated only for a short time.
If the zone operated sufficiently
long to be hot, speak to an Au-
thorised Service Centre.
Automatic Heat Up function
does not operate.
The zone is hot.
Let the zone become suffi-
ciently cool.
Automatic Heat Up function
does not operate.
The highest heat setting is set.
The highest heat setting has
the same power as the func-
tion.
The sensor fields become hot.
The cookware is too large or
you put it too near to the con-
trols.
Put large cookware on the rear
zones if possible.
There is no signal when you
touch the panel sensor fields.
The signals are deactivated.
Activate the signals.
Refer to "Hob - Daily use"
chapter.
comes on the hob display.
Automatic Switch Off oper-
ates.
Deactivate the hob and acti-
vate it again.
comes on the hob display.
The Child Safety Device or the
Lock function operates.
Refer to "Hob - Daily use"
chapter.
23