Problem
Possible cause
Remedy
The display shows an error code
that is not in this table.
There is an electrical fault.
Deactivate the oven with the
house fuse or the safety switch in
the fuse box and activate it again.
If the display shows the error
code again, contact the Custom-
er Care Department.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Installation
WARNING!
Refer to Safety chapters.
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
Keep a distance of about 1 cm
between the appliance and the back
wall to make sure that the lid opens.
For minimal distances for fitting check the table.
A
C
D
D
B
Minimum distances
Dimension
mm
A
400
B
650
C
150
20
www.zanussi.com
Содержание ZCG62386
Страница 1: ...EN ZCG62386 ZCG62396 User Manual Cooker EG ...
Страница 27: ...www zanussi com 27 ...
Страница 28: ...www zanussi com shop 867306266 A 372014 ...