Zanussi ZCE560, Руководство пользователя

Страница: 18 / 28

18
After Cleaning:
• Push the glass towards under the location bracket
“A”.
• Place the glass under location bracket “B”.
To clean the glass door panels
Clean the glass door panels using hot soapy water,
hob cleaner may also be used. Do not use hob
cleaner on the stainless steel or painted surfaces.
Ensure that all parts are well rinsed and thoroughly
dried before attempting to replace the glass.
If the door glass becomes chipped or has deep
scratches the glass will be weakened and must be
replaced to prevent the possibility of the panel
shattering. Please contact your local service force
centre who will be pleased to advise further.
Do not attempt to use the oven without the glass
being in place.
the checks have been made as the engineer will
make a charge if the fault is not a mechanical or
electrical breakdown.
Please note that proof of purchase is required for in-
guarantee service calls.
Cleaning between the outer and inner door
glass
Rough handling, especially around the edges of the
front panel, can cause the glass to break.
Removal of inner Glasses (if applicable )
Before cleaning the oven door glasses, you must pull
out the inner glass as shown:
• Push the glass towards direction 1 and release
from the location bracket .
• Pull out the glass towards direction 2.
After cleaning:
• Push the glass towards and under the cover
(towards to direction 3).
• Place the glass under the location bracket (towards
to direction 4).
If the oven door is the triple glass oven door, the third
glass can also be pulled out the same way as second
glass.
Please carry out the following checks on your
appliance before calling a Service Engineer. It may
be that the problem is a simple one which you can
solve yourself without the expense of a service call.
In-guarantee customers should make sure that
!
WARNING!
!
WARNING!
!
WARNING!
What to do if...
1
B
A
1
2
B
1
2
3
4