Zanussi ZC 550 ML Скачать руководство пользователя страница 7

Страница: 7 / 8

ADAPTING TO DIFFERENT GAS AND ADJUSTING

The burners can be adapted to different types of gas by mounting nozzles to the
type of gas in question. After, it will necessary to regulate the primary air and
adjust the minimum flow.

CHANGING OF NOZZLES

CHANGING OF NOZZLES FOR HOB

remove the pan supports and the burners

unscrew the two screws and remove the hob

unscrew the nozzles and replace them with the right ones (in the exchange set

delivered), conferring to the nozzles table.

CHANGING OF NOZZLES FOR OVEN

remove the oven bottom.

unscrew the fixing screw and remove the oven burner.

unscrew the nozzles and replace them with the right ones (in the exchange set

delivered), conferring to the nozzles table.

CHANGING OF GRILL BURNER NOZZLES

remove the burner by unscrewing the screw fixing it on the upper part.

unscrew the nozzle by a 10 mm and replace it with the corresponding one for

the type of gas and burner according to table of nozzles.

AIR ADJUSTING

The burner is well adjusted when the flame is stable silent ant dies out whiteout
any noise.

•

when the flames are too short, whistling or have the tendency to detach of the

burners, ignite at the nozzles means that the air admission has to be
diminished. If there is too much air flames risk to die out.

•

But, if the flames are too long, soft, lighting, the air admission has to be

increased. These flames smoke the bottom of pans.

no air

correct adjusting

excess of air

HOB BURNERS

−

Remove the pan supports and the burners.

−

Unscrew the two screws in front of hob and remove it.

−

Replace the burners.

−

Unscrew the air adjusting screw.

−

Move the air adjusting downwards for diminishing the air, upwards for increasing

it, for obtaining a correct adjusting of the burner.

−

Screw the fixing screw.

fixing screw

air adjusting

OVEN BURNER

Remove the oven bottom

Unscrew the air adjusting fixing screw

- Move the air adjusting forward for diminishing the air or backwards for

increasing it, for obtaining a correct adjusting of the burner.

Screw the fixing screw.

Содержание ZC 550 ML









Результаты поиска

Содержание ZC 550 ML

Отзывы:

Похожие инструкции для ZC 550 ML

Бренды по названию

Популярные бренды

Zanussi ZC 550 ML, Руководство пользователя

Результаты поиска

Содержание ZC 550 ML

Отзывы:

Похожие инструкции для ZC 550 ML

Бренды по названию

Популярные бренды