8
The freezer compartment will become progressively
covered with frost. This should be removed with the
special plastic scraper provided, whenever the
thickness of the frost exceeds 1/4".
During this operation it is not necessary to switch off
the power supply or to remove the foodstuffs.
However, when the ice becomes very thick on the
inner liner, complete defrosting should be carried out
and it is advisable to carry out this operation when
the appliance is empty.
To carry out complete defrosting proceed as follows:
1. Remove any stored food, wrap it in several layers
of newspaper and put it in a cool place.
2. Turn the thermostat control knob (2) to the «O»
setting.
3. Leave the door open and introduce the plastic
scraper in the appropriate seating at the base of
the cabinet as shown in the figure and place a
basin underneath to collect the defrost water.
4. When defrosting is completed, dry the interior
thoroughly.
Keep the scraper for future use.
Turn the thermostat control knob to a medium setting
and, after letting the appliance run for at least two
hours in the «fast freeze» mode, replace the
previously removed food into the compartments.
Important
A temperature rise of the frozen food packs
during defrosting may shorten their storage
life.
Never use sharp metal tools to scrape off frost
from the evaporator as you could damage the
appliance beyond repair.
D068
Defrosting
Содержание ZBF 6114
Страница 1: ...FREEZER INSTRUCTION BOOKLET 2222 753 66 ZBF 6114 ...
Страница 19: ......
Страница 20: ... Electrolux plc 2007 ...