Zanussi ZBB24431SA Скачать руководство пользователя страница 3

Clean the appliance with a moist soft cloth. Only use neutral

detergents. Do not use abrasive products, abrasive cleaning

pads, solvents or metal objects.

Do not store explosive substances such as aerosol cans with a

flammable propellant in this appliance.

If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarly

qualified persons in order to avoid a hazard.

SAFETY INSTRUCTIONS

INSTALLATION

WARNING! Only a qualified person

must install this appliance.

• Remove all the packaging and the transit bolts.

• Do not install or use a damaged appliance.

• Follow the installation instruction supplied with

the appliance.

• Always take care when moving the appliance as

it is heavy. Always use safety gloves and

enclosed footwear.

• Make sure the air can circulate around the

appliance.

• Wait at least 4 hours before connecting the

appliance to the power supply. This is to allow

the oil to flow back in the compressor.

• Do not install the appliance close to radiators or

cookers, oven or hobs.

• The rear of the appliance must stand against the

wall.

• Do not install the appliance where there is direct

sunlight.

• Do not install this appliance in areas that are too

humid or too colds, such as the construction

appendices, garages or wine cellars.

• When you move the appliance, lift it by the front

edge to avoid scratching the floor.

ELECTRICAL CONNECTION

WARNING! Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the electrical information on the

rating plate agrees with the power supply. If not,

contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the electrical

components (e.g. mains plug, mains cable,

compressor). Contact the Authorised Service

Centre or an electrician to change the electrical

components.

• The mains cable must stay below the level of the

mains plug.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure that

there is access to the mains plug after the

installation.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

USE

WARNING! Risk of injury, burns,

electrical shock or fire.

• Do not change the specification of this

appliance.

• Do not put electrical appliances (e.g. ice cream

makers) in the appliance unless they are stated

applicable by the manufacturer.

• Be careful not to cause damage to the

refrigerant circuit. It contains isobutane (R600a),

a natural gas with a high level of environmental

compatibility. This gas is flammable.

• If damage occurs to the refrigerant circuit, make

sure that there are no flames and sources of

ignition in the room. Ventilate the room.

• Do not let hot items to touch the plastic parts of

the appliance.

• Do not put soft drinks in the freezer

compartment. This will create pressure on the

drink container.

• Do not store flammable gas and liquid in the

appliance.

• Do not put flammable products or items that are

wet with flammable products in, near or on the

appliance.

3

Содержание ZBB24431SA













Отзывы: