Zanussi ZANZIFN844K, Руководство пользователя

Страница: 16 / 20

Problem Possible cause Remedy
and a number come on.
There is an error in the hob. Deactivate the hob and acti-
vate it again after 30 seconds.
If comes on again, discon-
nect the hob from the electrical
supply. After 30 seconds, con-
nect the hob again. If the prob-
lem continues, speak to an Au-
thorised Service Centre.
You can hear a constant beep
noise.
The electrical connection is in-
correct.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the in-
stallation.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
is in the corner of the glass surface) and an error
message that comes on. Make sure, you operated
the hob correctly. If not the servicing by a service
technician or dealer will not be free of charge, also
during the warranty period. The instructions about
the Service Centre and conditions of guarantee are
in the guarantee booklet.
TECHNICAL DATA
RATING PLATE
Model ZIFN844K PNC 949 595 722 00
Typ 62 D4A 01 AA 220 - 240 V / 400 V 2N 50 - 60 Hz
Induction 7.35 kW Made in Germany
Ser.Nr. ................. 7.35 kW
ZANUSSI
COOKING ZONES SPECIFICATION
Cooking zone
Nominal power
(maximum heat
setting) [W]
PowerBoost [W]
PowerBoost maxi-
mum duration
[min]
Cookware diame-
ter [mm]
Left front 2300 3200 10 125 - 210
Left rear 2300 3200 10 125 - 210
Middle front 1400 2500 4 125 - 145
Right rear 2300 3600 10 205 - 240
The power of the cooking zones can be different in
some small range from the data in the table. It
changes with the material and dimensions of the
cookware.
For optimal cooking results use cookware no larger
than the diameter in the table.
16