Remove any foreign objects (such as metal clip,
buttons, coins, etc) that you may find in the door
seal, the filters and the drum. Refer to 'Door seal
with double lip trap', 'Cleaning the drum', 'Cleaning
the drain pump' and 'Cleaning the inlet hose and
the valve filter' paragraphs. If necessary, please
contact the Authorised Service Centre.
EXTERNAL CLEANING
Clean the appliance with mild soap and warm water
only. Fully dry all the surfaces. Do not use a
scouring pads or any scratching material.
CAUTION! Do not use alcohol,
solvents or chemical products.
CAUTION! Do not clean the metal
surfaces with chlorine-based
detergent.
DESCALING
If the water hardness in your area is
high or moderate, we recommend that
you use a water descaling product for
washing machines.
Regularly examine the drum to check for limescale.
Regular detergents already contain water softening
agents, but we recommend to run a cycle with an
empty drum and a descaling product.
Always follow the instructions that you
find on the packaging of the product.
MAINTENANCE WASH
The repeated and prolonged use of low
temperature programmes can cause detergent
deposits, fluff residues, bacterial growth inside the
drum and the tub. This could generate bad odours
and mildew. To eliminate these deposits and clean
the inner part of the appliance, run a maintenance
wash regularly (at least once a month).
Refer to "Cleaning the drum"
paragraph.
DOOR SEAL WITH DOUBLE LIP TRAP
This appliance is designed with a self cleaning
draining system, allowing light fluff fibers that fall
off the clothes to be drained out with the water.
Regularly examine the seal. Coins, buttons, other
small items can be recovered at the end of the
cycle.
Clean it when needed, using ammonia cream
cleanser agent without scratching the seal surface.
Always obey the instructions that you
find on the packaging of the product.
Check and remove objects (if there are any) that
could be trapped in the fold.
Make sure that no laundry remains between the
seal and the door.
Use a moist cloth to wipe off any dirt or water
residue left behind in the door seal after completion
of program cycle.
CLEANING THE DRUM
Regularly examine the drum to prevent unwanted
deposits.
Rust deposits in the drum may occur due to rusting
foreign body in the washing or tap water containing
iron
Clean the drum with special products for stainless
steel.
Always follow the instructions that you
find on the packaging of the product.
Do not clean the drum with acidic
descaling products, scouring products
containing chlorine or iron or steel
wool.
For a thorough clean:
1. Remove all laundry from the drum.
2. Run the Machine Clean programme. For more
details, refer to washing programme table.
3. Add a small quantity of powder detergent into
the empty drum, in order to rinse out any left
residues.
Occasionally, at the end of a cycle the
display may show the icon
: this is a
recommendation to perform the “drum
cleaning”. Once the drum cleaning has
been performed, the icon disappears.
31
Содержание Z814W85BI
Страница 1: ...GETTING STARTED EASY User Manual Z814W85BI EN User Manual Washing Machine ...
Страница 42: ......
Страница 43: ......
Страница 44: ...WWW ZANUSSI COM SHOP 157020005 A 412021 ...