Zanussi Z716WT83BI, Руководство пользователя

Страница: 3 / 52

•
This appliance is intended to be used in household and similar
applications such as:
–
staff kitchen areas in shops, offices and other working
environments;
–
by clients in hotels, motels, bed & breakfast and other
residential type environments;
–
areas for communal use in blocks of flats or in launderettes.
•
The appliance shall be installed as a freestanding product or
below the kitchen worktop if space margins permit.
•
Do not install the appliance behind a lockable door, a sliding
door or a door with a hinge on the opposite side, that would
prevent the appliance door from being fully open.
•
Connect the mains plug to the mains socket only at the end of
the installation process. Make sure that the mains plug is
accessible after installation.
•
The ventilation opening in the base must not be covered by a
carpet, mat, or any floor covering.
•
CAUTION: The appliance must not be supplied through an
external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by a utility.
•
Ensure good air ventilation in the room where the appliance is
installed to avoid the backflow of unwanted gases into the room
from appliances burning gas or other fuels, including open fires.
•
Exhaust air must not be discharged into a flue which is used for
exhausting fumes from any appliances burning gas or other
fuels.
•
The operating water pressure at the water entry point from the
outlet connection must be between 0.5 bar (0.05 MPa) and 8
bar (0.8 MPa).
•
Do not exceed the maximum load of 7 kg (refer to the
"Programme chart" chapter).
•
The appliance must be connected to the water mains using the
new supplied hose sets, or other new hose sets supplied by
the Authorised Service Centre.
•
Old hose sets must not be reused.
3