Zanussi Z712W43BI, Руководство пользователя

Страница: 10 / 44

The inlet hose
1. Remove the inlet hose from inside the drum.
2. To connect the water inlet hose towards the prop-
er direction and with the proper inclination, check the
position of the water tap before connecting it to the
back of the appliance.
Make sure the hose is nor kinked,
squashed but neither tensed.
20
O
20
O
45
O
45
O
3. Connect the hose to the back of the appliance. Do
not turn the inlet hose downwards, but turn it left or
right depending on the position of your water tap.
4. Loosen the ring nut to fix it in the correct position.
5. Connect the water inlet hose to the cold water tap
with 3/4 thread.
WARNING! Make sure that there are no
leaks from the couplings.
Use the hose supplied with appliance.
Do not use an extension hose if the inlet hose is too short. Contact the Authorised Service
Centre for an inlet hose replacement.
Water drainage
The drain hose can be connected:
10