15
GLASS LID
For cleaning purposes, the lid can be
easily removed upwards once taken to
the upright position.
Should the hinges slip off, replace them
in their housing being careful that:
– The right housing must receive the
hinge marked “D” while the left hous-
ing must receive the hinge marked “S”
(Fig. 6.1)
Fig. 6.1
S
D
R
6 - CLEANING AND MAINTENANCE
REGULATING OF THE BALANCE
Lower the lid and check the correct bal-
ance. While opened at 45° it should
hang up.
The springs of the hinges can be adjust-
ed if necessary by turning the screws
“R” clockwise (fig. 6.1).
Do not close the cooker lid when
the burners are still hot and
when the oven is on or still hot.
Do not rest hot pans or heavy
objects on the cooker lid.
Remove any spillages from the
surface of the cooker lid before
opening.
GENERAL ADVICE
– When the appliance is not being used,
it is advisable to keep the gas tap clo-
sed.
– Every now and then check to make
sure that the flexible tube that con-
nects the gas line or the gas cylinder
to the appliance is in perfect condition
and eventually substitute it if it shows
signs of wearing or damage.
– The periodical lubrication of the gas
taps must be done only by specialized
personnel.
– If a gas tap jams, do not try to force
it. Seek technical assistance.
– Important:
Before any operation of cleaning
and maintenance disconnect the
appliance from the electrical
network.
Do not use a steam cleaner
because the moisture can get into
the appliance thus make it unsafe.
