Zanussi TCE7125, Руководство пользователя

Страница: 11 / 20

11
reservoir, if it has
been emptied in
the middle of a
programme after
lighting up of the
light.
In both cases the
light of the
button flashes to
remind you that the
start button needs
to be pressed
again.
6 Indicator lights
These lights
indicate the
following functions:
light
(Clogged
condenser)
It comes on every
80 cycles to remind
you that the
condenser must be
cleaned.
light
(Clogged filters)
This light
illuminates at the
end of the
programme to
remind you that the
filters must be
cleaned.
light
(Full tank)
This light comes on
at the end of the
programme to
remind you that the
water reservoir
must be emptied
out. If this light
illuminates during a
programme this
means that the
water reservoir is
full. The buzzer
sounds, the
programme stops,
the light of the
button flashes.
7 Delay Start
button
This button allows
you to delay the
starting of the
programme by 3, 6
or 9 hours.
Press the button
until the light
relevant to the
desired delay lights
up. This option
must be selected
after having
selected the
programme and
before 3 6 9
pressing to start
the programme.
The machine
begins the
countdown, which is
shown by the pilot
lights. For example,
if you have chosen
a 9- hour delay
(pilot light 9h lit),
after 3 hours, 9h
goes out and 6h
lights up; after 3
more hours, 6h
goes out and 3h
lights up. When the
9 hours are over
(pilot light 3h off),
the drying cycle
begins. During the
delayed start
period, it is not
possible to change
the programme or
the selected delay.
If you wish to do so,
you must first
cancel everything
by rotating the
programme selector
dial to position
O
Select the new
programme, the
options and the
delayed start, then
press
If you wish to
change only the
options, this can be
done on condition
that the new
option(s) is(are)
compatible with the
programme. Set the
machine to PAUSE
by depressing the
relevant button,
select the new
option(s) and
depress
button again. If you
wish to add some
laundry while the
machine is
performing the
countdown, after
having done so and
having closed the
door, press
again, in order to
allow the machine
to complete the
remaining
countdown time.