Zanussi TC 180, Инструкция пользователя

Страница: 5 / 19

- 5 -
1. Door Latch
(push the knob to the right to open)
Avoid opening the door while a program is in
progress.
2. Space for programme chart
(Self-adhesive label)
3. Control panel with indicator lights
• Lights
A.
Indicates the dryer is running
B.
Indicates that the water tank is full
• On/off timer knob
C.
Turn this knob in a clockwise direction to start the
dryer and set both the drying time and the drying
temperature.
High heat:
The timer indicates up to 120 mins for
cotton/linen.
Low heat:
The time indicates up to 80 mins for
synthetics.
The last 8 - 12 minutes of each drying cycle is a cool
down phase.
4. Warm air discharge
5. Adjustable feet
If the dryer is not being wall mounted the feet need
to be adjusted so that the dryer is level.
6. Air ducts
- These should not be obstructed.
7. Filters
Should be cleaned before or after each load.
The fluff filter is behind the coarse filter and can
be removed for cleaning.
8. Condenser
This is built into the door and needs to be cleaned
at regular intervals.
9. Water tank
This fills up with the water condensed by the dryer,
and should be emptied before or after each load.
When the tank is full, warning light (B) will come on
and the dryer will stop automatically. It cannot be
restarted until the tank has been emptied.
10. Drum
11. Rating plate
12. Electrical supply cable
13. Holder for wall mounting console
A
B
C
3