Zanussi Series 51 New, Руководство по обслуживанию

Страница: 12 / 13

FROM THE BACK PANEL
After having removed the back panel cover, remove the worktop, undo the screws provided at the top and
fastening the back panel to the cross bar and to the sides, and at the back undo the screws fastening the
back panel to the base, disengage the tags provided on the base and slide out the back panel.
3 - Door microswitch
4 - Motor
5 - Capacitor
7 - Cycling thermostat
14 - Front sealing felt ring
DRUM AND DRIVE BELT
They may be removed after having removed the back panel.
FRONT SEALING FELT RING
It may be removed after having removed the back panel.
BACK SEALING FELT RING
Widen out the back panel tags and slide out the back sealing felt ring
WARNING!
Do not damage the felt ring when refitting it.
The seam of the back sealing felt ring must be turned towards the bottom of the black panel
.
- 12 -